Ghost Immobiliser Installation

Add a ghost immobiliser your car and protect it from thieves. Our TASSA-certified system is safe from key cloning, hacking, and vehicle immobiliser bypass.

The system is hidden within the wiring loom of your vehicle, making it totally invisible to anyone looking. It works by creating pin code push sequences that are activated by buttons already present on the steering wheel, door cards and the centre console.

No circuit cuts

A car is a valuable item that takes hours of work to acquire, so it's understandable why owners want to safeguard their vehicle against theft. Traditional security systems, such as wheel locks or alarms, are easily manipulated by thieves. A ghost immobiliser however is a very effective solution that is silent and isn't easily detected by modern thieves.

A ghost immobiliser, also known as a hidden device is a device that communicates to your vehicle's data network CAN to disable the engine. It does this without the use of key fobs or radio frequencies. It communicates with the ECU of your vehicle by using buttons on the steering wheel, dash and door panels. This creates an individual pincode that is only available to you. The code can be altered at any time, and can include up to 20 digits based on your preference. It also includes a secure emergency code that you can utilize should you forget your PIN.

The ghost immobiliser can also be used to stop relay boxes from transmitting the car key's signal inside your home, which would unlock the doors and then start the vehicle. It could also block the latest techniques of stealing your car such as OBD port hacking. The device is tiny, weatherproof and difficult to spot. It's also difficult to alter.

Another benefit of the ghost immobiliser is that it can be fitted to your vehicle without permanent marks. This is ideal for those who are planning to resell their car in the future. It's also much more efficient and less time-consuming to install than a factory-fitted system.

The autowatch ghost 2 immobiliser Ghost is a groundbreaking next-generation device that blocks contactless stolen cars by connecting to the vehicle's CAN data network and utilizing existing buttons to generate a unique PIN. This is a hidden system that can be installed without cutting any wires, and does not require additional key fobs. It also connects to the original ECU of the vehicle, preventing thieves by stealing it using a new key. This system is TASSA verified and can be connected to an International Security Register, allowing owners peace of mind knowing their vehicles are protected against theft.

No RF scanning

You'll want to secure your vehicle from theft if you have spent lots of money and time customizing it. Installing an immobiliser is one of the best ways to prevent theft. It will stop your vehicle from beginning until you enter a unique code. Utilizing the buttons on your steering wheel as well as the dashboard, you can generate an apex of 20 digits long that is only known to you, and ensure that only you are able how to install ghost immobiliser drive your vehicle. It is also possible to set up a service and valet mode, which will allow you to start your car for a short period without having to enter the PIN code. This will permit your technician to work on your vehicle without you being present. This feature is ideal for those who want to reduce time and simplify their lives.

Ghost immobilisers are next generation device that connects to the vehicle's CAN data network and uses the buttons on the dashboard and steering wheel to programme a personalised PIN code. It is designed to be discrete and has no light or sound to signal it, and can be fitted anywhere on your vehicle without disturbing the aesthetics of your pride and joy.

This stealthy system is TASSA approved and could reduce your insurance costs. It has a tracking function that will locate your vehicle even if it's gone missing. This is particularly useful if have a rare or expensive vehicle that you've invested many hours personalising.

autowatch ghost 2 immobiliser Ghost, in conjunction with the iPhone application allows you to remotely start your vehicle in the event that you've forgotten your PIN code or are unable to access your vehicle. This feature is perfect if you need to pick up the kids or run errands, but don't want to risk having someone else drive your vehicle. This feature is useful when you need to take your vehicle in for service or repair.

Another benefit of the Ghost is that it is unable to transmit or detect radio frequency signals, which makes it undetectable to thieves who use RF scanning or code technology to capture codes. It can also protect your vehicle from key cloning, ECU swapping and other typical methods of theft.

No key to cloning

ghost immobiliser fitting near me immobilisers are an excellent option for protecting expensive automobiles and are designed to prevent key cloning. They work by preventing your car from starting until an additional PIN code is entered along with the regular key fob. This makes it very difficult for thieves to rob your vehicle, and may deter them from doing it initially. This is a great idea if you have invested a lot of time and money in personalising your vehicle or own a unique or expensive model.

The immobilisers are connected to the vehicle's CAN network and are completely hidden meaning that their presence is not visible. It is also impossible for thieves to locate the device using radio frequency scanning or code grabbing technology. This means that a thief will have to spend a lot more time in order to successfully steal your car.

A criminal will need to be aware of the unique pin sequence and the exact location of the ghost to avoid it. However, the pin code will be specific to you and can be altered as many times as you want. The pin code is easy for you to remember but mathematically impossible for anyone else to work out. The engineer will also have provided an emergency pin code in case you forget the pin.

The Ghost CAN Bus immobiliser can be easily mounted anywhere on your vehicle. It works with all vehicles and completely customizable to match the style of your car. It is also extremely affordable and easy to use. You can even transfer the device to a different vehicle if you decide to change vehicles in the course of ownership, as long as the new vehicle is compatible with the.

The immobiliser on the CAN bus is compatible with many other security features. It could, for instance detect damage to the vehicle and alert the owner. It also can shut down the engine if the car is tampered with. The system can also protect your vehicle from hacking and key cloning. It can also detect vibrations or contact with the vehicle. It can also notify the owner when the vehicle is moving.

No OBD port hacking

Ghost uses an immobiliser hidden in the module that is connected to the CAN data network of your vehicle which prevents a thief from gaining access to your vehicle to disable the alarm, turn off the key fob and code new keys. This technology is a major improvement on traditional methods that have been used by thieves in the past to take your vehicle. The CAN data network also means that your system won't be affected by disconnecting or change your battery.

The Autowatch Ghost is the first aftermarket CAN bus that is a non-detectable immobiliser that protects against key-cloning, hacking, and theft of replica cars. It works without LED indications or key-fobs, instead leveraging the buttons on your steering wheel, centre console and door panels to allow you to create a unique PIN sequence (up to 20 button presses) that needs to be entered first before you can drive your car away.

Modern thieves employ diagnostics to detect cuts in the circuit on your vehicle and can bypass immobilisers that require a large amount of wiring or are incorporated into the wiring. The Ghost is weatherproof, doesn't require additional wiring and cannot be detected by professional diagnostic tools. It can be even installed on vehicles equipped with anti-theft equipment.

Another advantage of a ghost immobiliser fitting immobiliser is that your vehicle is only able to be started by a person who has access to the PIN number and has physical access to your vehicle. This is a major benefit over traditional security systems which can be tampered with using simple cable tampering, a screwdriver or the utilisation of a universal remote controller.

If you forget your PIN you can reset it easily with the emergency PIN override function on a mobile device or computer. This is helpful if you are looking to start your vehicle after having left it in a garage or by using the valet parking service.

The Autowatch ford focus ghost installer (sneak a peek at this site) 2 is the latest version of the product, and is insurance approved by TASSA when installed by one of our authorized installers. It features a QR fingerprint system for specific components to be identified, which will allow the return of stolen parts in the event that they are discovered, and can also be turned into a'service mode' that will allow the engine to start when your car is in a garage or with a valet parking service, but you will need to enter your PIN code to exit the vehicle again.