Replacement UPVC Door Handles

You can find the ideal handle for your door, whether you are replacing your handles or adding additional security. The Upvc handles are simple to install and have the minimum 92mm central distance for multipoint locks.

The backplate fixing center and the lever/keyhole dimensions are the most important measurements. Compare these measurements to your existing marks carefully before placing an order.

Lever/Pad

Lever pad handles consist of a lever on one side and a paddle-shaped handle on the other. These are designed for use with key wind locks. However they can also be attached to multipoint split spindle door locks.

Once you have selected the right handle for your doors the available finishes will be shown in the drop-down menu. Certain types of handles are not available in all finishes. It is recommended to look over the technical drawings and dimensions sections for the particular item you are looking to ensure that you get the right size and fit.

When selecting new lever pad door handle replacements handles made of upvc, it is important to ensure that they correspond to the PZ (distance between the handle spindle and the center of the cylinder hole) of your current multipoint door locks, as they need to be in the same line to allow doors to remain locked, either from the inside or outside. Our handles are designed to fit the majority of conventional cylinders, but it is important to double-check prior to purchasing.

You will need to remove your handles that you have already installed and then dismantle the lock case if you're upgrading to dual spindle levers for your handle as this will require a split cylinder inline. You can purchase these separately. We have included a technical illustration in the images of each product.

It is a good idea to loosen the screws that are holding your existing victorian door handle Locking window handle and then check the mechanism. It is possible that you will need to loosen the screws a bit more if they are not tight. After that, you can take off the old handle and spindle and install your new upvc door handle. It is crucial to make sure that the handle is in the right position prior to screwing it into place. You can do this by placing your finger between the door frame and the handle to make sure that it is level.

Lever/Lever

The lever handles on doors are used to operate a multi-point lock using an Euro cylinder. They are found on many upvc double doors as well as wooden and aluminum doors. They are available in two types, with the lever inside and a paddle on the outside. Sprung - they include a spring cassette within the backplate to help move the handle lever to the horizontal position. Non-sprung: They do not include a mechanism that can spring the handle lever into a horizontal position.

To fix a door handle lever that is sagging you'll need to locate the hole or detent access pin. This is usually small, protruding ring, or rectangle, located on the handle base plate. Once you have located the hole for accessing the detent or pin, you are able to remove it with an screwdriver.

After the handle is set horizontally, it is possible to install the screws. Tighten them to ensure that the handle remains firmly connected to the base plate. You may want to apply a threadlocking solution to the screw threads in order to increase grip and stop them from loosing over time.

Drooping lever handles on door handles could be the result of various causes. The most common cause is that the fixings aren't tight which causes the lever bearing to bind against the door. It could also be due to the fact that the levers are not being operated in a straight line and this is causing the latch mechanism preventing it from fully springing back into operation.

The most common reason for a sprung lever not working correctly is the spring not being in the right position on the backplate. To check whether the handle has returned to its horizontal position, simply turn it.

If your door handles are loose it is crucial to find the problem quickly, as this can lead to excessive wear on the screws, and even to the handle falling off the base plate. It is recommended to tighten all loose screws on a regular basis, as this will help to prevent them from becoming loose.

Lever/Snib

These handles made of upvc are called 'Snib handle sets' and feature a snib lock button at the top of the door lever. If you don't have a dummy lock device, you can use this to secure the door. These window handles are fitted with a Fullex lock 68PZ. (68mm between the spindle and lock centre). We also have a selection of door handles 68PZ from manufacturers like Ferco and Fab & Fix.

Changing your door handle is an inexpensive way to update your home, whether you're replacing handles that are in use or fitting new ones to doors you've constructed in your home. There are many styles to choose from for upvc door handles, including the traditional levers on backplates. Other options include curved or straight short latches as well as dummy knobs for multi-point locks. These are perfect for French doors.

Lever on backplate handles are typically rectangular, but there are also oval or circular-shaped versions, which are known as rose door handles. These types of door handles are equipped with an a knob or lever on a backplate which is placed behind the lever or knob and is sometimes called a rosette, although some back plates can be detached for concealed fixing.

There is a variety of coloured and chrome finishes available for these handles to match your door and other hardware, such as bolts, knobs and hinges. Some handles come with grub screw to attach the knob or lever to the spindle. Some handles are equipped with bathroom spindles that can be used for bathroom locks. They also come with an release mechanism that turns the thumb and can be used on bathroom doors.

Mortise

The tubular latch is most likely to be the cause of this when your door handle made of uPVC is stuck open. There may be a few factors that could cause this, one of which is an unlubricated latch plate on the latch plate. This can be corrected quickly by opening the door and spraying lubricant over the lock and handle. Or, it could be that the latch plate is dislodged from the backplate. This could be more of a problem and will require a specialist to repair.

A multipoint door handle system is the ideal solution to the problem of a stuck door handle. These handles are mounted on the aluminium door handle's faceplate and are operated by an actuated thumb turn knob or key that triggers an electronic cam that locks the deadbolt. The handles are available in a variety of different sizes to fit various types of uPVC doors and come with a variety of attractive finishes that match existing hardware. These handles can be purchased on the internet or through an authorized locksmith in your area. They are easy to install with clear instructions.

You will need to know your PZ cylinder's size to select the right replacement handle set. This is the measurement in millimetres between the inner edge of the door frame and the centre of the handle hole. It is also important to be aware of whether your door has hook locks or a mortise style lock. Once you have these measurements, the simplest method to locate the correct handles is to filter by brand on the website. This will help narrow down your options, and then you'll be able to select the correct size.

A typical handle set comprises an arm with two screws of various lengths, drill guides and installation instructions. Smart versions, like the Igloohome Smart Mortise 2+ include a mortice lock with keys. These are more complex units and are best suited for professionals who install them or skilled DIYers. Some handle sets come with many accessories, such as weather strips, which can be used to enhance the appearance of the door.